Click image to view full size image
Multi-circuit compact design gold contacting Slip Ring for Test Instrument
A slip ring can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power and / or data from a stationary to a rotating structure. A slip ring is also called a rotary electrical interface, collector, swivel or an electrical rotary joint. 
ByTune is specialized in design slip rings for test instruments such as bio-experiment，university laboratory, weather-forecast, etc…
Multi-circuits
Hybrid with hydraulic or pneumatic
Very sensitive on signal
Dimension Felxible
Parameters:Multi-circuit compact design gold contacting Slip Ring for Test Instrument
Mechanical :Multi-circuit compact design gold contacting Slip Ring for Test Instrument
Working speed |
As per requested |
Operating temperature |
-40℃~ +100℃ |
Contact material |
Precious metal |
IP Grade |
IP54 |
Electrical:Multi-circuit compact design gold contacting Slip Ring for Test Instrument
Circuit |
As per request ， |
Current |
2A, higher optional |
Signal |
As per requested |
Voltage |
≤380V, |
Dielectric strength |
≥1000V@50Hz between each circuit |
Insulation resistance |
1000MΩ@ 500VDC |
Electric noise |
≤7mΩ |
Lead wire size |
As per requested Wire or Metal Pin |
Lead wire length |
Standard in 300mm |
Features Multi-circuit compact design gold contacting Slip Ring for Test Instrument
●Dimension individual
●Hybrid of electrical with hydraulic or/and pneumatic
●Typically circuits more than 50
●Electric noise is very low
●Different signal and power compatible
●Easy installation
●Workable in hostile environment
Alternatives Multi-circuit compact design gold contacting Slip Ring for Test Instrument
●Circuits
●Loading of each circuit
●Wire length
●Different signal compatible
●Dimension
●Installation way
Test instrument and manufacture capability:
Measurement and Test:
3D Test Concentricity Test
Electric noise Test Projecto
Interference test Reliable contact Test